FR-F700 INSTRUCTION MANUAL (BASIC) - MRO Stop

Parameter list4.9.3 Parameter list indicates simple mode parameters.FunctionManual torque boostMaximum/minimumfrequencyBase frequency, voltageMulti-speed setting operationParameterRelatedparametersNameIncrements0 Torque boost 0.1%46Second torqueboost1 MaximumfrequencyInitialValue6/4/3/2/1.5/1%*10.1% 99990.01Hz120/60Hz*2Range0 to 30%DescriptionSet the output voltage at 0Hz as %.*1 Initial values differ according to theinverter capacity. (0.75K / 1.5K to 3.7K /5.5K, 7.5K / 11K to 37K / 45K, 55K /75K or more)ParametercopyParameterclearAllparameterclear◦: enabled× : disabled◦ ◦ ◦0 to 30%Set the torque boost when the RT signalis on. ◦ ◦ ◦9999 Without second torque boost0 to 120HzSet the upper limit of the output frequency.*2 The setting depends on the invertercapacity. (55K or less/75k or more)◦ ◦ ◦2 Minimum frequency 0.01Hz 0Hz 0 to 120Hz Set the lower limit of the output frequency. ◦ ◦ ◦18High speedmaximumfrequency0.01Hz120/60Hz*3120 to 400Hz3 Base frequency 0.01Hz 60Hz 0 to 400Hz19474 5 6 24to27232to239Base frequencyvoltageSecond V/F (basefrequency)Multi-speed setting(high speed)Multi-speed setting(middle speed)Multi-speed setting(low speed)Multi-speed setting(4 speed to 7speed)Multi-speed setting(8 speed to 15speed)0.1V 99990.01Hz 9999Set when performing the operation at120Hz or more.*3 The setting depends on the invertercapacity. (55K or less/75k or more)Set the frequency when the motor ratedtorque is generated. (50Hz/60Hz)0 to 1000V Set the base voltage.8888 95% of power supply voltage9999 Same as power supply voltage◦ ◦ ◦◦ ◦ ◦◦ ◦ ◦0 to 400HzSet the base frequency when the RTsignal is on. ◦ ◦ ◦9999 Second V/F is invalid0.01Hz 60Hz 0 to 400Hz Set frequency when the RT signal is on. ◦ ◦ ◦0.01Hz 30Hz 0 to 400Hz Set frequency when the RM signal is on. ◦ ◦ ◦0.01Hz 10Hz 0 to 400Hz Set frequency when the RL signal is on. ◦ ◦ ◦0.01Hz 99990.01Hz 99990 to 400Hz,9999 Frequency from 4 speed to 15 speed canbe set according to the combination of the0 to 400Hz,9999RH, RM, RL and REX signals.9999: not selected◦ ◦ ◦◦ ◦ ◦68