FR-F700 INSTRUCTION MANUAL (BASIC) - MRO Stop

More documents

Recommendations

Info

Wiring2.4.8 When connecting the operation panel using a connection cableWhen connecting the operation panel (FR-DU07) to the inverter using a cable, the operation panel can be mountedon the enclosure surface and operationality improves.Parameter unit connection cable(FR-CB2)(option)Operation panel(FR-DU07)Operation panel connection connector(FR-ADP)(option)CAUTIONDo not connect the PU connector to the computer's LAN port, FAX modem socket or telephone connector.The inverter and machine could be damaged due to differences in electrical specifications.REMARKS⋅ Refer to page 5 for removal method of the operation panel.⋅ When using a commercially available connector and cable as a parameter unit connection cable, refer to Instruction Manual(applied) chapter 2.⋅ The inverter can be connected to the computer and FR-PU04/FR-PU07.2INSTALLATION AND WIRING25
Wiring2.4.9 RS-485 terminal block⋅⋅⋅⋅⋅Conforming standard: EIA-485(RS-485)Transmission format: Multidrop linkCommunication speed: MAX 38400bpsOverall length: 500mConnection cable:Twisted pair cable(4 paires)OPEN100ΩTerminating resistor switchFactory-set to "OPEN".Set only the terminating resistor switch ofthe remotest inverter to the "100Ω" position.RDA1(RXD1+)(RXD1-) RDB1(RXD2+) RDA2(RXD2-)RDB2RXDTXDSDA1 SDB1 SDA2 SDB2(TXD1+)(TXD1-)(TXD2+) (TXD2-)P5S(VCC)SG(GND)P5S(VCC)SG(GND)VCC2.4.10 Communication operationUsing the PU connector or RS-485 terminal, you canperform communication operation from a personalcomputer etc. When the PU connector is connectedwith a personal, FA or other computer by acommunication cable, a user program can run andmonitor the inverter or read and write to parameters.For the Mitsubishi inverter protocol (computer linkoperation), communication can be performed with thePU connector and RS-485 terminal.For the Modbus RTU protocol, communication can beperformed with the RS-485 terminal.PLCInverter Inverter InverterMultidrop link(32 inverters maximumare connectable)For further details, refer to(applied) chapter 4.Instruction Manual26
Page 1 and 2: INVERTERINSTRUCTION MANUAL (BASIC)F
Page 3 and 4: — CONTENTS —1 PRODUCT CHECKING
Page 5 and 6: 6 PRECAUTIONS FOR MAINTENANCE AND I
Page 7 and 8: 2 INSTALLATION AND WIRINGThree-phas
Page 9 and 10: Peripheral devices400V classMotorOu
Page 11 and 12: Method of removal and reinstallatio
Page 13 and 14: Wiring2.4 Wiring2.4.1 Terminal conn
Page 15 and 16: Wiring2.4.3 Specification of main c
Page 17 and 18: Wiring400V classFR-F740-0.75K to 5.
Page 19 and 20: Wiring(1) Cable sizes etc., of the
Page 21 and 22: Wiring(2) Notes on earthing (ground
Page 23 and 24: UVWWiring• FR-F720-15K, FR-F740-1
Page 25 and 26: WiringTypeFrequency settingTerminal
Page 27 and 28: Wiring2.4.6 Changing the control lo
Page 29: Wiring2.4.7 Wiring of control circu
Page 33 and 34: Precautions for use of the inverter
Page 35 and 36: Failsafe of the system which uses t
Page 37 and 38: Operation panel (FR-DU07)3.2 Operat
Page 39 and 40: Operation panel (FR-DU07)3.2.3 Oper
Page 41 and 42: Operation panel (FR-DU07)3.2.7 Chan
Page 43 and 44: When the rated motor frequency is 5
Page 45 and 46: Start/stop from the operation panel
Page 53 and 54: Make a start and stop with terminal
Page 61 and 62: Increase the starting torque (Pr. 0
Page 63 and 64: Change acceleration and deceleratio
Page 65 and 66: Energy saving operation (Pr. 60)Ope
Page 67 and 68: Parameter clear, all parameter clea
Page 69 and 70: Parameter copy and parameter verifi
Page 71 and 72: Parameter listOperation selection a
Page 73 and 74: Parameter list4.9.3 Parameter list
Page 75 and 76: Parameter listFunctionJog operation
Page 77 and 78: Parameter listFunctionDetection of
Page 79 and 80: Parameter listFunctionRetry functio
Page 81 and 82:
Parameter listFunctionOperation mod
Page 83 and 84:
Parameter listFunctionChange of ana
Page 85 and 86:
Parameter listSwitch between the in
Page 87 and 88:
Parameter listFunctionOperation sel
Page 89 and 90:
Parameter listFunctionSlip compensa
Page 91 and 92:
Parameter listFunctionPU connector
Page 93 and 94:
Parameter listFunctionRegeneration
Page 95 and 96:
Parameter listFunctionAdjustment of
Page 97 and 98:
List of faults or alarm display5.2
Page 99 and 100:
Causes and corrective actionsOperat
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Correspondences between digital and
Page 111 and 112:
Check and clear of the faults histo
Page 113 and 114:
Check first when you have troubles5
Page 115 and 116:
Inspection item6 PRECAUTIONS FOR MA
Page 117 and 118:
Inspection item6.1.4 Display of the
Page 119 and 120:
Inspection item(1) Cooling fanThe r
Page 121 and 122:
Inspection item• Removal (FR-F740
Page 123 and 124:
Rating7 SPECIFICATIONS7.1 Rating•
Page 125 and 126:
Common specifications7.2 Common spe
Page 127 and 128:
Outline dimension drawings7.3 Outli
Page 129 and 130:
Outline dimension drawings• FR-F7
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Outline dimension drawings• Opera
Page 139 and 140:
Heatsink protrusion attachment proc
Page 141 and 142:
For customers who have replaced the
Page 143 and 144:
Appendix 2 Instructions for UL and
Page 145 and 146:
Appendix 3 Instructions for Complia
Page 147:
REVISIONS*The manual number is give
show all

FR-F700 INSTRUCTION MANUAL (BASIC) - MRO Stop

Create successful ePaper yourself

Delete template?

Save as template?