FR-F700 INSTRUCTION MANUAL (BASIC) - MRO Stop

REVISIONS*The manual number is given on the bottom left of the back cover.Print Date * Manual Number RevisionDec., 2003 IB(NA)-0600176ENG-A First editionMar., 2004 IB(NA)-0600176ENG-B AdditionsFR-F740-0.75K to 30KJun., 2004 IB(NA)-0600176ENG-C AdditionsFR-F740-75K, 90KOct., 2004 IB(NA)-0600176ENG-D Additions⋅ FR-F720 - 0.75K to 55K⋅ FR-F740 - 110K to 160K⋅ Pr.299 Rotation direction detection selection at restartingMar., 2005 IB(NA)-0600176ENG-E Additions⋅ FR-F720 - 75K to 110K⋅ FR-F740 - 185K to 560KJul., 2006 IB(NA)-0600176ENG-F Additions⋅ Pr. 539 Modbus-RTU communication check time interval⋅ Voltage/current input switch⋅ Setting value "2" of Pr. 882 Regeneration avoidance operation selectionNov., 2007 IB(NA)-0600176ENG-G AdditionsAdditional explanation to "Causes and Corrective Actions"⋅ Setting values "10, 11" of Pr. 495 Remote output selection⋅ Partial review of Instructions for UL and cUL CompliancePartial changes⋅ Replacement procedure of the cooling fun of FR-F740-185K or moreFor Maximum Safety• Mitsubishi inverters are not designed or manufactured to be used in equipment or systems in situations thatcan affect or endanger human life.• When considering this product for operation in special applications such as machinery or systems used inpassenger transportation, medical, aerospace, atomic power, electric power, or submarine repeatingapplications, please contact your nearest Mitsubishi sales representative.• Although this product was manufactured under conditions of strict quality control, you are strongly advisedto install safety devices to prevent serious accidents when it is used in facilities where breakdowns of theproduct are likely to cause a serious accident.• Please do not use this product for loads other than three-phase induction motors.142IB(NA)-0600176ENG-G