31.07.2015 Views

Vol 2 - Garney Construction

Vol 2 - Garney Construction

Vol 2 - Garney Construction

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Nominal Maximum Aggregate Sizein.‡Air Content(%)*‡See ASTM C33/C33M for tolerance on oversize for various nominalmaximum size designations.*Tolerance of air content is +1-1/2 percent.§Air contents apply to total mixture. When testing concretes, however,aggregate particles larger than 1-1/2 inches are to be removed bysieving and air content will be measured on sieved fraction (toleranceon air content as delivered applies to this value). Air content of totalmixture is computed from value measured on the sieved fractionpassing the 1-1/2-inch sieve in accordance with ASTM C231/C231M.5. Limit supplementary cementitious materials measured as a percent ofweight of total cementitious materials in mix design, as follows:a. Slag Cement: 50 percent.b. Total cementitious materials include ASTM C150/C150M andASTM C595/C595M cement.1) Pozzolans in Type IP, blended cement,ASTM C595/C595M.2) Slag used in the manufacture of an IS blended cement,ASTM C595/C595M.3) Silica fume, ASTM C1240, present in blended cement.6. Provide cementitious materials in accordance with one of the following:a. ASTM C150/C150M Type II; inclusion of supplementarycementitious materials in design mix is optional.b. ASTM C150/C150M types other than Type II, plus supplementarycementitious materials in accordance with one of the following:1) Tricalcium Aluminate Content of Total CementitiousMaterials: Maximum 8 percent by weight.2) Provide documentation of test results in accordance withASTM C1012/C1012M, for combinations of cementitiousmaterials providing sulfate resistance with expansion lessthan 0.10 percent at 6 months.c. ASTM C595/C595M Type IP or Type IS (less than 70), tested tocomply with moderate sulfate resistance option (MS).1) Provide documentation of test results in accordance withASTM C1012/C1012M, for combinations of cementitiousmaterials providing sulfate resistance with expansion lessthan 0.10 percent at 6 months.CAST-IN-PLACE CONCRETEPW/WBG/38205903 30 00 SUPPLEMENT 01 - 2 AUGUST 15, 2012©COPYRIGHT 2012 CH2M HILL

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!