Vol 2 - Garney Construction

C. Carefully handle to avoid damage to surfaces, edges, and ends.D. Do not open packages until ready for use.E. Store materials in dry, weathertight, ventilated areas until immediately beforeinstallation.1.06 SPECIAL GUARANTEEA. Product: Furnish manufacturer’s extended guarantee or warranty, with Ownernamed as beneficiary, in writing, as Special Guarantee. Special Guaranteeshall provide for correction or, at the option of the Owner, removal andreplacement of factory-applied fluoropolymer coating, finish, and accessoriesfound defective during a period of20 years after date of SubstantialCompletion. Duties and obligations for correction or removal and replacementof defective Work shall be as specified in General Conditions.B. Conditions:1. Finish: No cracking, blistering, flaking, chipping, checking, chalking,peeling, or fading.2. All Components: Watertight and weathertight with normal usage.PART 2PRODUCTS2.01 METALA. Galvanized Sheet Steel: ASTM A653/A653M, G90 zinc coating, commercialquality copper bearing steel.B. Aluminum Sheet: ASTM B209, Alloy 5005-H34, alloy and temper as requiredfor application and finish.1. Thickness: 0.040 inch, unless otherwise shown.2. Texture: Smooth.3. Finish:a. Concealed: Mill finish.b. Exposed: Architectural Class I clear anodic coating in 0.70-milthickness.C. Stainless Steel: ASTM A666, Type 304 or Type 316, soft temper; No. 2D,dull finish, 0.018 inch thick, unless otherwise shown.PW/WBG/382059SHEET METAL FLASHING AND TRIMAUGUST 15, 2012 07 62 00 - 3©COPYRIGHT 2012 CH2M HILL