Vol 2 - Garney Construction

1.08 ADJUSTMENT OF CONTRACT TIMESA. Reference General Conditions and Section 01 26 00, Contract ModificationProcedures.B. Evaluation and reconciliation of Adjustments of Contract Times shall bebased on the Updated Progress Schedule at the time of proposed adjustment orclaimed delay.C. Float:1. Float time is a Project resource available to both parties to meet contractMilestones and Contract Times.2. Use of float suppression techniques such as preferential sequencing orlogic, special lead/lag logic restraints, and extended activity times areprohibited, and use of float time disclosed or implied by use of alternatefloat-suppression techniques shall be shared to proportionate benefit ofOwner and Contractor.3. Pursuant to above float-sharing requirement, no time extensions will begranted nor delay damages paid until a delay occurs which (i) impactsProject’s critical path, (ii) consumes available float or contingency time,and (iii) extends Work beyond contract completion date.D. Claims Based on Contract Times:1. Where Engineer has not yet rendered formal decision on Contractor’sClaim for adjustment of Contract Times, and parties are unable to agreeas to amount of adjustment to be reflected in Progress Schedule,Contractor shall reflect an interim adjustment in the Progress Scheduleas acceptable to Engineer.2. It is understood and agreed that such interim acceptance will not bebinding on either Contractor or Owner, and will be made only for thepurpose of continuing to schedule Work until such time as formaldecision has been rendered as to an adjustment, if any, of the ContractTimes.3. Contractor shall revise Progress Schedule prepared thereafter inaccordance with Engineer’s formal decision.PART 2PART 3PRODUCTS (NOT USED)EXECUTION (NOT USED)END OF SECTIONPW/WBG/382059CONSTRUCTION PROGRESSAUGUST 15, 2012DOCUMENTATION©COPYRIGHT 2012 CH2M HILL 01 32 00 - 7