Vol 2 - Garney Construction

d) Static pressure, capacity, horsepower demand andoverall efficiency required at the duty point, includingdrive losses.g. Motor(s) type, quantity, and performance data.h. Air filter(s) type, quantity, and performance data.i. Unit capacities and ratings, including airflow and static pressuresummary.j. Construction materials.k. Power and control wiring diagrams, including terminals andnumbers.l. Vibration Isolation:1) Vibration isolation methods with maximum deflection data.2) Additional requirements (including by others) to achievespecified vibration isolation levels.m. Factory finish system.2. “Or Equal” Equipment:a. Where submitted equipment results in change to fan inlet or outletductwork configuration shown on drawings, submit system effectfactor calculations indicating increased static pressurerequirements as described in AMCA 201.b. Where submitted equipment results in change to ductwork andequipment configuration shown on drawings, submit detailedinformation on structural, mechanical, electrical, or othermodifications necessary to adapt arrangement or details shown toequipment furnished.B. Informational Submittals:1. Manufacturer’s Certificate of Compliance in accordance withSection 01 43 33, Manufacturers’ Field Services.2. Recommended procedures for protection and handling of products priorto installation.3. Manufacturer’s installation instructions, including component spacingrequirements.4. Operation and Maintenance Data:a. In conformance with Section 01 78 23, Operation andMaintenance Data.b. Include as-built version of equipment schedules.c. Methods for accessing components for maintenance with requiredservice clearances.AIR HANDLING UNITSPW/WBG/38205923 77 00 - 4 AUGUST 15, 2012©COPYRIGHT 2012 CH2M HILL