Vol 2 - Garney Construction

3. Manufacturer’s Color Chart: Units or sections of units showing fullrange of colors, textures, and patterns available.4. Full-size Samples:a. Size as indicated in individual specification section.b. Prepared from same materials to be used for the Work.c. Cured and finished in manner specified.d. Physically identical with product proposed for use.D. Action Submittal Dispositions: Engineer will review, comment, stamp, anddistribute as noted:1. Approved:a. Contractor may incorporate product(s) or implement Workcovered by submittal.b. Distribution:1) One copy furnished Owner.2) One copy furnished Resident Project Representative.3) One copy retained in Engineer’s file.4) Remaining copies returned to Contractor appropriatelyannotated.2. Approved as Noted:a. Contractor may incorporate product(s) or implement Workcovered by submittal, in accordance with Engineer’s notations.b. Distribution:1) One copy furnished Owner.2) One copy furnished Resident Project Representative.3) One copy retained in Engineer’s file.4) Remaining copies returned to Contractor appropriatelyannotated.3. Partial Approval, Resubmit as Noted:a. Make corrections or obtain missing portions, and resubmit.b. Except for portions indicated, Contractor may begin to incorporateproduct(s) or implement Work covered by submittal, inaccordance with Engineer’s notations.c. Distribution:1) One copy furnished Owner.2) One copy furnished Resident Project Representative.3) One copy retained in Engineer’s file.4) Remaining copies returned to Contractor appropriatelyannotated.4. Revise and Resubmit:a. Contractor may not incorporate product(s) or implement Workcovered by submittal.SUBMITTAL PROCEDURESPW/WBG/38205901 33 00 - 4 AUGUST 15, 2012©COPYRIGHT 2012 CH2M HILL