Vol 2 - Garney Construction

F. Exit Signs (Type G):1. Material: Plastic, 1/8 inch minimum thickness.2. Letters:a. 6 inches high, with 3/4-inch stroke.b. 2 inches wide, except for letter “I”, with spacing of 3/8 inch.3. Colors: Red letters and direction arrows on white background.G. Hazardous Material Signals (Type H):1. Conform to NFPA 704 and NFPA HAZ-01.2. Material: Fiberglass 1/8 inch thick.3. Background, Letters, and Numbers: Die-cut vinyl with pressuresensitive adhesive.4. Manufacturers:a. Brady Signmark.b. Emed Co., Inc.2.05 IDENTIFICATION LABELSA. Pipe Labels:1. Labels:a. Snap-on, reversible type with lettering and directional arrows,sized for outside diameter of pipe and insulation.b. Provided with ties or straps for pipes of 6 inches and overdiameter.c. Designed to firmly grip pipe so labels remain fixed in vertical piperuns.2. Material: Heavy-duty vinyl or polyester, suitable for exterior use, longlasting, and resistance to moisture, grease, and oils.3. Letters and Arrows: Black on OSHA safety yellow background.4. Color Field and Letter Height: Meet ASME A13.1.5. Message: Piping system name as indicated on Piping Schedule.6. Manufacturers and Products:a. Brady Signmark; B-915 BradySnap-On and Strap-On PipeMarkers.b. Seton Identification Products; Ultra-mark Pipe Markers.B. Pipe Labels:1. Labels: Self-adhesive tape, with separate directional flow arrows.2. Material: Pressure sensitive vinyl.3. Letters and Arrows: Black on OSHA safety yellow background.4. Color Field and Letter Height: ASME A13.1.5. Message: Piping system name as indicated on Piping Schedule.SIGNAGEPW/WBG/38205910 14 00 - 4 AUGUST 15, 2012©COPYRIGHT 2012 CH2M HILL