Agilent 34980A  Multifunction Switch/Measure Unit *34980-90005*

Features and Functions 3
Front Panel Operation: Store/Recall > STORE|RECALL|DELETE|RENAME|AUTO
To rename a location, select RENAME. Press the arrow keys to move the
cursor to a specific position and then turn the knob to select the desired
letter or number. To clear the name of a location, change each character
to “ ^ ” (starting with the rightmost character) and then press the left
arrow key to move to the next character.
To automatically recall a specific location when power is restored,
select AUTO. Use the knob to scroll through the available locations
containing a stored state.
Remote Interface Operation: Use the following commands to store and
recall instrument states.
*SAV {1|2|3|4|5}
*RCL {1|2|3|4|5}
To assign a user- defined name to a stored state to be recalled from the
front panel, see the following example. From the remote interface, you can
only recall a stored state using a number (1 through 5).
MEM:STAT:NAME 1,TEST_RACK_1
To configure the instrument to automatically recall location 2 when power
is restored, send the following commands.
*SAV 2
MEM:STATE:RECALL:SELECT 2
MEM:STATE:RECALL:AUTO ON
Agilent 34980A Mainframe User’s Guide 149