Agilent 34980A Multifunction Switch/Measure Unit *34980-90005*
Agilent 34980A Multifunction Switch/Measure Unit *34980-90005*
Agilent 34980A Multifunction Switch/Measure Unit *34980-90005*
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2 Getting Started<br />
Configure Key Group<br />
Use these menus to set <br />
measurement parameters.<br />
<br />
<br />
<br />
The DMM Menu<br />
• Set the internal DMM’s measurement function (AC volts, DC volts, AC current, DC<br />
current, 2-wire ohms, 4-wire ohms, temperature, frequency, and period)<br />
• Set measurement function parameters<br />
The Channel Menu<br />
• Set channel measurement function (AC volts, DC volts, AC current (34921A only), DC<br />
current (34921A only) 2-wire ohms, 4-wire ohms, temperature, frequency, and period)<br />
• Set measurement function parameters<br />
The Scan Menu<br />
• Set trigger-in parameters<br />
• Set sweep count<br />
• Set sample count<br />
The Sequence Menu<br />
• View a sequence command string<br />
• Execute the sequence<br />
• Delete sequence definitions<br />
The Module Menu<br />
• Open all relays<br />
• Clear all measurement functions<br />
• Clear channel labels<br />
• Configure external trigger and clock (applies only to 34951A module)<br />
• Set trace or level mode (applies only to 34951A module)<br />
• Set waveform parameters (applies only to 34951A module)<br />
The View Menu<br />
• View errors and alarms<br />
The Advanced Key<br />
This key is reserved to operate advanced functions in a future firmware release. When<br />
activated, you will be notified in the release notes accompanying the enabling firmware<br />
revision.<br />
The Alarm Menu<br />
• Select one of four alarms to report alarm conditions on the displayed channel<br />
• Configure a high limit, a low limit, or both for the displayed channel<br />
• Select the slope (rising or falling edge) for the four alarm output lines<br />
The Exit Menu Key<br />
Press to leave the current menu, saving all changes made in that menu<br />
36 <strong>Agilent</strong> <strong>34980A</strong> Mainframe User’s Guide