Agilent 34980A Multifunction Switch/Measure Unit *34980-90005*
Agilent 34980A Multifunction Switch/Measure Unit *34980-90005*
Agilent 34980A Multifunction Switch/Measure Unit *34980-90005*
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Connecting Via Site LAN<br />
Example<br />
Site LAN<br />
Connection<br />
PC<br />
To Network<br />
Interface Card<br />
(NIC) To LAN Port<br />
To Site LAN<br />
Getting Started 2<br />
1 Using a standard LAN patch cable (not supplied), connect your<br />
computer and the <strong>34980A</strong> to LAN wall outlets.<br />
2 Make sure power is applied to your computer and verify that the<br />
operating system is fully booted. Then apply power to the <strong>34980A</strong>.<br />
3 Using the flow diagram shown below, navigate through the <strong>34980A</strong><br />
front- panel Utility menu. At the IO PORT menu, select LAN. At the<br />
LAN SETTINGS menu, select MODIFY and verify that DHCP is ON<br />
(ON is the factory default state). If your LAN does not support DHCP,<br />
refer to the Connectivity Guide.<br />
Front Panel Menu<br />
Navigation Flow Diagram<br />
to Configure a<br />
Site LAN Connection<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<strong>34980A</strong><br />
<strong>Agilent</strong> <strong>34980A</strong> Mainframe User’s Guide 47