Agilent 34980A  Multifunction Switch/Measure Unit *34980-90005*

2 Getting Started
Modifying the Channel Configuration
NOTE
1 To modify the measurement configuration of individual channels (e.g.,
add channel labels, select function and range, etc.), right- click directly
on the graphic of the desired relay. The Channel Configuration dialog
box for that channel is displayed.
1
2
You must be in the Allow Full Control mode to modify the channel
configuration.
2 As an example, change the label on Channel 1001 to DUT_1. Click OK.
58 Agilent 34980A Mainframe User’s Guide