Agilent 34980A Multifunction Switch/Measure Unit *34980-90005*
Agilent 34980A Multifunction Switch/Measure Unit *34980-90005*
Agilent 34980A Multifunction Switch/Measure Unit *34980-90005*
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2 Getting Started<br />
Front Panel at a Glance<br />
1 The On/Standby switch is used to toggle the <strong>34980A</strong> between On and Standby modes only. To turn the unit off, remove<br />
the power cord.<br />
2 The Utility key accesses menus to configure Remote I/O (LAN, GPIB, and USB) operation, set Date and Time, and<br />
configure other system-related instrument parameters.<br />
3 The Store/Recall key allows you to save and recall up to six instrument setups.<br />
4 Control keys directly control module actions.<br />
5 The number keypad is used for entering numerical characters.<br />
6 The exponent entry key is used to enter the exponent during a numerical entry.<br />
7 The Cancel key exits any menu without saving changes.<br />
8 Arrow keys move the cursor position in an entry.<br />
9 The knob provides for entry of alphanumeric characters, selecting slots or channels, and navigating menus.<br />
10 The Enter key steps you through a menu or saves number entries.<br />
11 Running a program puts the display into “remote” and disables the front panel keys. Local takes you out of “remote”<br />
mode and enables the front panel keys.<br />
12 Configure keys select functions and set function parameters.<br />
13 <strong>Measure</strong> keys execute and monitor measurements. Depending on which measurement key you use, you can have<br />
complete/direct control over the switching and measurement operation, or you can have the <strong>34980A</strong> automatically<br />
control these to capture the desired data.<br />
22 <strong>Agilent</strong> <strong>34980A</strong> Mainframe User’s Guide
Change language