Agilent 34980A Multifunction Switch/Measure Unit *34980-90005*
Agilent 34980A Multifunction Switch/Measure Unit *34980-90005*
Agilent 34980A Multifunction Switch/Measure Unit *34980-90005*
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Host Name<br />
Features and Functions 3<br />
The Host Name is the host portion of the domain name, which is<br />
translated into an IP address.<br />
If you change the Host Name, you must cycle power on the <strong>34980A</strong> to<br />
activate the new setting. <br />
The default Host Name for the <strong>34980A</strong> is “A- <strong>34980A</strong>- nnnnn”, where<br />
nnnnn represents the last five digits of the instrument’s serial number.<br />
If Dynamic Domain Name System (DNS) is available on your network<br />
and your instrument uses DHCP, the Host Name is registered with the<br />
Dynamic DNS service at power- on.<br />
If DHCP is enabled, the DHCP server can change the specified<br />
Host Name.<br />
The Host Name is stored in non- volatile memory, and does not change<br />
when power has been off, after a Factory Reset (*RST command), or<br />
after an Instrument Preset (SYSTem:PRESet command).<br />
Front Panel Operation:<br />
Utility > REMOTE I/O > LAN > LAN SETTINGS > MODIFY > . . . HOST NAME<br />
Remote Interface Operation:<br />
<br />
SYSTem:COMMunicate:LAN:HOSTname ""<br />
<strong>Agilent</strong> <strong>34980A</strong> Mainframe User’s Guide 75