ABBREVIATIONS USED IN THIS MANUAL

AT8471
AT7753
SST
AT7754
AT3498
AT8282
Clutch Disc
Flange
AUTOMATIC TRANSAXLE (A241H) - Component Parts (Valve Body)
Clutch
Plate
ASSEMBLY OF DIFFERENTIAL ASSEMBLY
1. INSTALL DIFFERENTIAL LOCK CLUTCH PISTON
(a) Coat the four O-rings with ATF.
(b) Install the four O-rings to the reaction sleeve and
pistons.
(c) Install the No. 1, No. 2 pistons and reaction
sleeve to the ring gear mounting right case.
2. INSTALL RETURN SPRING
(a) Place the spring on the piston.
(b) Place SST on the spring retainer, and compress
the spring with a press.
SST 09350-32014 (09351-32070)
(c) Using snap ring pliers, install the snap ring.
3. INSTALL PLATE, DISCS AND FLANGE
(a) Install the plate and discs.
Install in order: P = Plate D = Disc
P-D-P-D-P-D-P-D-P-D-P-D-P-D
AX-195
(b) Install the flange with a facing the flat end downward.