ABBREVIATIONS USED IN THIS MANUAL

AT5684
AT7932
AT2852
AT0102
AT0103
AUTOMATIC TRANSAXLE (A240L, A241E, A243L) - Removal of Component Parts
(e) Remove the O-Ring from the sensor cover.
(f) Remove the sensor rotor.
(g) Remove the three bolts and sensor adaptor.
9. REMOVE PAN AND GASKET
(a) Remove the eighteen bolts.
(b) Remove the pan by lifting the transmission case.
NOTICE: Do not turn the transmission over as it will
contaminate the valve body with the foreign materials
in the bottom of the pan.
(c) Remove the gasket.
(d) Place the transmission on wooden blocks to prevent
damage to the pipes.
10. EXAMINE PARTICLES IN PAN
Remove the magnets and use them to collect any steel
clips. Lock carefully at the chips and particles in the
pan and on the magnet to anticipate what type of wear
you will find in the transmission:
Steel (magnetic) . . . . . . . bearing, gear and plate wear
Brass (non-magnetic) . . bushing wear
11. TURN TRANSMISSION OVER
AX-25