ABBREVIATIONS USED IN THIS MANUAL

AT3362
AT3363
AT3364
TRANSFER (A241H) - Component Parts (Transfer Left Case)
(b) Install driven pinion cage.
Torque: 39 N-m (400 kgf-cm, 29 ft-lbf)
HINT: Do not install the O-ring.
(c) Install ring gear mounting case and center differential
case.
(d) Using a dial indicator, measure the ring gear
backlash.
Backlash: 0.13 - 0.18 mm (0.0051 - 0.0071 in.)
(e) Referring to the table bellow, select the plate
washer which will ensure that the backlash is with
in specification.
Plate washer thickness mm (in.)
Mark Thickness Mark Thickness
71 2.13 (0.0839) 83 2.49 (0.0980)
72 2.16 (0.0850) 84 2.52 (0.0992)
73 2.19 (0.0862) 85 2.55 (0.1004)
74 2.22 (0.0874) 86 2.58 (0.1016)
75 2.25 (0.0886) 87 2.61 (0.1028)
76 2.28 (0.0898) 88 2.64 (0.1039)
77 2.31 (0.0909) 89 2.67 (0.1051)
78 2.34 (0.0921) 90 2.70 (0.1063)
79 2.37 (0.0933) 91 2.73 (0.1075)
80 2.40 (0.0945) 92 2.76 (0.1087)
81 2.43 (0.0957) 93 2.79 (0.1098)
82 2.46 (0.0969) 94 2.82 (0.1110)
Try select a washer of the same size.
TR-33