ABBREVIATIONS USED IN THIS MANUAL

AT3114
AT1290
AT2860
A12861
AT3036
No. 1 Spring
(B 2)
AUTOMATIC TRANSAXLE (A241H) - Removal of Component Parts
17. REMOVE SOLENOID WIRE
18. REMOVE SECOND BRAKE APPLY GASKET
AX-155
19. REMOVE C3 ACCUMULATOR PISTON AND SPRING
Using low-pressure compressed air (98 kPa, 1 kg/cm 2 ,
14 psi), pop out the piston into a rag. Force air into the
hole shown and remove the piston and spring.
20. REMOVE ACCUMULATOR PISTONS AND SPRINGS
(a) Loosen the five bolts one turn at a time until the
spring tension is released.
(b) Remove the cover, gasket and spring on the B2
piston.