ABBREVIATIONS USED IN THIS MANUAL

AX-214
AT3501
AT3500
AT0610
AT7892
AT0324
AUTOMATIC TRANSAXLE (A241H) - Installation of Component Parts
(b) Install in order: D = Disc P = Plate
D-P-D-P-D-P-D-P-D-P-D
(c) Install the outer flange, the flat end facing downward.
42. INSTALL SNAP RING
HINT: Be sure the snap ring end gap is not aligned with
one of the cutouts.
43. CONFIRM THAT FIRST AND REVERSE BRAKE PIS-
TON MOVES
Using compressed air, confirm that the first and reverse
brake piston moves smoothly.
44. INSTALL REAR PLANETARY RING GEAR TO CASE
(a) Coat the races and bearing with petroleum jelly, ,
and install them onto the ring gear as shown.
Bearing and races mm (in.)
Outer diameter Inner diameter
Front Race 27.3 (1.469) 24.1 (0.949)
Bearing 37.6 (1.480) 24.0 (0.945)
Rear Race 37.6 (1.480) 22.0 (0.874)