25.07.2013 Views

ABBREVIATIONS USED IN THIS MANUAL

ABBREVIATIONS USED IN THIS MANUAL

ABBREVIATIONS USED IN THIS MANUAL

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Flange<br />

Disc<br />

Plate<br />

AT3113<br />

AT2952<br />

AT2942<br />

Hold<br />

AT8001<br />

Free<br />

Thrust Washer<br />

Lock<br />

Turn<br />

AUTOMATIC TRANSAXLE - Component Parts (Underdrive Clutch<br />

and One-Way Clutch No. 3)<br />

Flange<br />

Disc<br />

Plate<br />

3. <strong>IN</strong>STALL PLATES, DISCS AND FLANGE<br />

Install in order: D = Disc P = Plate F = Flange<br />

A241E F-D-P-P-D-P-P-D-P<br />

A243L F-D-P-D-P-D-P<br />

A240L<br />

A241H<br />

H<strong>IN</strong>T: Install the flange the flat end facing downward.<br />

4. <strong>IN</strong>STALL SNAP R<strong>IN</strong>G<br />

Install the snap ring to the underdrive clutch.<br />

AX-87<br />

5. <strong>IN</strong>STALL ONE-WAY CLUTCH TO CLUTCH DRUM<br />

(a) Install the thrust washer to clutch drum.<br />

(b) Install the one-way clutch with the claw of retainer<br />

up.<br />

6. CHECK OPERATION OF ONE-WAY CLUTCH<br />

Hold the one-way clutch drum and turn the one-way<br />

clutch.<br />

Check that the one-way clutch turns freely counterclockwise<br />

and lock clockwise.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!