ABBREVIATIONS USED IN THIS MANUAL

AX-146
AT5639
AT5730
AT7762
AT5638
AT5637
AUTOMATIC TRANSAXLE (A240L, A241E, A243L) - Installation of Component Parts
Neutral
Basic
Line
Groove
85. INSTALL NEUTRAL START SWITCH
(a) Install the neutral start switch to the manual valve
shaft.
(b) Install the packing. (A240L, A241E)
(c) Install the nut and lock stopper.
(d) Tighten the nut.
Torque: 6.9 N-m (70 kgf-cm, 61 in.-lbf)
(e) Temporarily install the manual shift lever.
(f) Turn the lever counterclockwise until it stops, then
turn it clockwise two notches.
(g) Remove the manual shift lever.
(h) Align the groove and neutral basic line as shown.
(i) Install and tighten the two bolts.
Torque: 5.4 N-m (55 kgf-cm, 48 in.-lbf)
(j) Using a screwdriver, stake the nut with the nut
stopper.
(k) Install the manual shift lever with the washer, and
tighten the nut.
86. INSTALL FILLER TUBE AND TRANSMISSION DIP-
STICK
87. INSTALL TWO OIL COOLER PIPES