ABBREVIATIONS USED IN THIS MANUAL

AX-68
AT5821
AT2743
AT2744
AUTOMATIC TRANSAXLE - Component Parts (Second Brake)
Printed
Numbers
INSPECTION OF SECOND BRAKE
COMPONENT
INSPECT DISCS, PLATES AND FLANGE
Check if the sliding surface of the discs, plates and
flange are worn or burnt. If necessary, replace them.
HINT:
If the lining of the disc is exfoliated or discolored,
or even a part of the printed numbers are defaced,
replace all discs.
Before assembling new discs, soak them in ATF
for at least fifteen minutes.
ASSEMBLY OF SECOND BRAKE PISTON
INSTALL PISTON
(a) Coat a new O-ring with ATF.
(b) Install the two O-rings on the piston.
(c) Press the piston into the drum, being careful not
to damage the O-rings.