ABBREVIATIONS USED IN THIS MANUAL

AX-224
AT2865
AT2866
AT3225
AT3036
AT1290
C 3
No. 2
No. 1
B 2
No. 1 Spring
(B 2)
SST
AUTOMATIC TRANSAXLE (A241H) - Installation of Component Parts
C 2
C 1
Outer
Inner
70. MEASURE PISTON STROKE OF SECOND COAST
BRAKE
(a) Apply a small amount of paint to the piston rod at
the point it meets the case as shown in the illustration.
(b) Using SST, measure the piston stroke applying
and releasing the compressed air (392 - 785 kPa,
4 - 8 kg/cm 2 , 57 - 114 psi) as shown.
SST 09240-00020
Piston stroke: 1.5 - 3.0 mm (0.059 - 0.118 in.)
If it is still more than standard value, replace the brake
band with a new one.
71. INSTALL ACCUMULATOR PISTONS AND SPRINGS
(a) Coat the new O-rings with ATF, and install them
to the pistons.
(b) Install the pistons and springs.
C 1
Spring Free length mm (in.) Color
Outer 78.2 (3.079) Yellow
Inner 41.0 (1.614) Pink
C 2 66.2 (2.606) Blue
B 2
No. 1 36.5 (1.437) White
No. 2 56.7 (2.232) Yellow
C 3 62.1 (2.445) Light Green
(c) install a new gasket and accumulator cover.
(d) Tighten the five bolts shown in the illustration
evenly and gradually.
72. INSTALL SECOND BRAKE APPLY GASKET