ABBREVIATIONS USED IN THIS MANUAL

AX-130
AT5704
AT2965
AT2966
AT0798
AT0618
Lock
A
Flange
AUTOMATIC TRANSAXLE (A240L, A241E, A243L) - Installation of Component Parts
Rear
Planetary
Gear
SST
Thrust Washer
Free
(c) Check that part A of the rear planetary gear is
below the upper surface of the flange.
46. INSTALL NO. 2 ONE-WAY CLUTCH
(a) Place the one-way clutch into the case, the shiny
side facing upward.
(b) Install the one-way clutch onto the inner race
while turning the planetary gear clockwise with
SST.
SST 09350-32014 (09351-32050)
(c) Check that the planetary gear turns freely clockwise
and locks counterclockwise.
(d) Coat the thrust washer with petroleum jelly and
install it onto the planetary gear.
47. INSTALL SNAP RING
Be sure the end gap of the snap ring is not aligned with
one of the cutouts.
48. INSTALL SECOND BRAKE INTO CASE
(a) Install the flange, the flat side facing upward.