ABBREVIATIONS USED IN THIS MANUAL

AT3397
AT3361
AT3363
Proper Contact
TRANSFER (A241H) - Component Parts (Transfer Left Case)
Heel Contact
Mark Thickness Mark Thickness
A
B
C
D
E
Select an adjusting shim that will bring the driven
pinion closer to the ring gear.
Toe Contact
0.30 (0.0118)
0.33 (0.0130)
0.36 (0.0142)
0.39 (0.0154)
0.42 (0.0165)
F
G
H
J
K
Fase Contact
Flank Contact
Select an adjusting shim that will shift the driven
pinion away from the ring gear.
(c) If the teeth are not connecting properly, again the
proper shim and plate.
mm (in.)
0.45 (0.0177)
0.48 (0.0189)
0.51 (0.0201)
0.54 (0.0213)
0.57 (0.0224)
7. REMOVE TRANSFER RIGHT CASE
Remove the ten bolts and transfer right case.
TR-35
8. REMOVE RING GEAR MOUNTING CASE AND CEN-
TER DIFFERENTIAL CASE