ABBREVIATIONS USED IN THIS MANUAL

A241E
♦ Gasket
Plate
♦ O-Ring
No. 3 Solenoid
♦ Non-reusable part
Adjusting
Ring
6.5 (65, 56 in.-lbf)
6.5 (65, 56 in.-lbf)
N-m (kgf-cm, ft-lbf)
AUTOMATIC TRANSAXLE (A240L, A241E, A243L) - Component Parts (Valve Body) AX-89
Specified torque
♦ O-Ring
Plunger Sleeve
AT3045
Valve Body
COMPONENTS
A240L, A241L, A243L
Upper Valve Body
♦ No. 1 Gasket
Plate
♦ No. 2 Gasket
Lower Valve Body
♦ Gasket
Lower Valve Plate
Body Cover ♦ Gasket
♦ O-Ring
No. 1 Solenoid
No. 2 Solenoid
10 (100, 7)
6.5 (65, 56 in.-lbf)
Solenoid
Lower Valve Body Cover
Stainer
(Disassembly of Valve Body)
6.5 (65, 56 in.-lbf)
AT8455 AT3140
1. NOTE THE NUMBERS OF ADJUSTING RINGS
HINT: Count the number of adjusting rings before disassembly
of the valve body because the throttle pressure
is changed according to the number. (Some of the
valve bodies do not have any adjusting rings.)
2. NOTE THE POSITION OF PLUNGER SLEEVE
Note which step at the end of the plunger sleeve is in
contact with the valve body.
HINT: Be certain to check this before disassembly because
the line pressure changes according to the part
of the plunger sleeve which comes into contact with the
valve body.