ABBREVIATIONS USED IN THIS MANUAL

AT2759
AT0631
AT2593
AT2868
AT2023
AUTOMATIC TRANSAXLE (A241H) - Installation of Component Parts
59. INSTALL FRONT PLANETARY GEAR
(a) Coat the race and bearing with petroleum jelly and
install them onto the planetary gear.
Bearing and races mm (in.)
Outer diameter Inner diameter
Race 45.0 (1.772) 28.0 (1.102)
Bearing 45.0 (1.772) 30.0 (1.181)
(b) Install the planetary gear.
60. INSTALL FRONT PLANETARY RING GEAR
(a) Coat the races and bearing with petroleum jelly
and install them onto the planetary ring gear.
Bearing and races mm (in.)
Outer diameter Inner diameter
Front Race 37.9 (1.492) 22.0 (0.866)
Bearing 36.1 (1.421) 22.2 (0.874)
Rear Race 35.0 (1.378) 19.0 (0.748)
(b) Install the ring gear.
AX-219
HINT: If the planetary ring gear and the other parts are
installed correctly into the case, the end of the bushing
with the ring gear flange will be flush with a shoulder of
the intermediate shaft or under.