ABBREVIATIONS USED IN THIS MANUAL

AT3353
AT8269
AT3352
AT3351
SST
0.1 - 0.9 mm
TRANSFER (A241H) - Component Parts (Transfer Left Case)
(b) Install case Retainer.
Torque: 25 N-m (260 kgf-cm, 19 ft-lbf)
TR-39
20. INSTALL EXTENSION HOUSING
(a) Using SST and a hammer, drive in a new oil seal
as shown.
SST 09325-20010
Oil seal depth: 0.1 - 0.9 mm (0.004 - 0.035 in.)
(b) Coat the lip of the oil seal with MP grease.
(c) Coat a new O-ring with gear oil.
(d) Install dust deflector and O-ring to the extension
housing.
(e) Install extension housing to the drive pinion bearing
cage.
Torque: 25 N-m (260 kgf-cm, 19 ft-lbf)
21. INSTALL TRANSFER MODE SELECT LEVER AND
ROD
(a) Install the lever, rod and lever guide.
Torque: 13 N-m (130 kgf-cm, 9 ft-lbf)
(b) Install the bolt while setting the lever as shown.
Torque: 13 N-m (130 kgf-cm, 9 ft-lbf)