ABBREVIATIONS USED IN THIS MANUAL

AT2861
AT3111
AT2863
AT3141
AT2865
AUTOMATIC TRANSAXLE (A240L, A241E, A243L) - Removal of Component Parts
22. REMOVE ACCUMULATOR PISTONS AND SPRINGS
(a) Loosen the five bolts one turn at a time until the
spring tension is released.
(b) Remove the cover and gasket.
(c) (A240L)
Remove the cover, gasket and spring on the B2
piston.
(d) Remove the C1 piston and two springs.
AX-29
(e) Using low-pressure compressed air (98 kPa, 1
kg/cm 2 , 14 psi), pop out the C2 piston into a rag.
Force air into the hole shown and remove the piston
and spring.
(f) Using low-pressure compressed air (98 kPa, 1
kg/cm 2 , 14 psi), pop out the B2 into the a rag.
Force air into the hole shown and remove the piston
and spring.
23. MEASURE PISTON STROKE OF SECOND COAST
BRAKE
(a) Apply a small amount of paint to the piston rod at
the point it meets the case as shown in the illustration.