ABBREVIATIONS USED IN THIS MANUAL

AX-66
AT0185
AT4306
AT2741
AT7714
AT7715
Hold
Lock
Free
AUTOMATIC TRANSAXLE - Component Parts (Front Planetary Gear)
Turn
4. INSTALL ONE-WAY CLUTCH AND SECOND BRAKE
HUB ON SUN GEAR
While turning the hub clockwise, slide the one-way
clutch onto the sun gear.
5. RECHECK OPERATION OF ONE-WAY CLUTCH
INSPECTION OF FRONT PLANETARY GEAR
MEASURE PLANETARY PINION GEAR THRUST
CLEARANCE
Using a feeler gauge, measure the planetary pinion gear
thrust clearance.
Standard clearance: 0.2 - 0.5 mm
(0.008 - 0.020 in.)
Maximum clearance: 0.5 mm (0.020 in.)
If the clearance is greater than the maximum, replace the
planetary gear assembly.
INSPECTION OF PLANETARY RING GEAR
1. INSPECT RING GEAR FLANGE BUSHING
Using a dial indicator, measure the inside diameter of the
flange bushing.
Standard inside diameter: 19.025 - 19.050 mm
(0.7490 - 0.7500 in.)
Maximum inside diameter: 19.100 mm (0.7520 in.)
If the inside diameter is greater than the maximum, replace
the flange.
2. REMOVE RING GEAR FLANGE
(a) Using a screwdriver, remove the snap ring.
(b) Remove the flange from the ring gear.
3. INSTALL RING GEAR FLANGE
(a) Position the flange onto the ring gear.
(b) Using a screwdriver, install the snap ring.