ABBREVIATIONS USED IN THIS MANUAL

Q00981
AT0548
AT0547
AT2959
AT0545
AUTOMATIC TRANSAXLE (A240L, A241E, A243L) - Installation of Component Parts
(d) Apply seal packing or equivalent to the six screws.
Seal packing: Part No. 08833 - 00070, THREE BOND
1324 or equivalent
(e) Using a torx wrench, install and tighten the three
screws.
7. INSTALL MANUAL VALVE SHAFT AND LEVER
(a) Install the parking lock rod to the manual valve
lever.
(b) Slide in the shaft and install the washer, new
spacer and manual lever.
AX-1 19
(c) Install the retaining spring.
HINT: Make sure there is a washer between the retaining
spring and case.
8. INSTALL PIN
(a) Using a pin punch and hammer, drive in the pin.
(b) Position the spacer and stake it.
9. INSTALL CAM GUIDE BRACKET
Install the cam guide bracket and then install the parking
lock rod into the guide bracket.