Emulator Composite.book - Creative

Oscillator
Pitch Bend Range
These two sliders allow you to set the amount of pitch bend up or down when a MIDI
pitch wheel message is received. Pitch wheel messages are automatically routed to pitch
unless these controls are set to zero.
TwistaLoop Controls
Speed
Please refer to page 202 for detailed information about this control.
Loop (% or number)
Please refer to page 201 for detailed information about the “Loop %” control.
Please refer to page 195 for detailed information about the “Loop Number” control.
Start At Loop
Please refer to page 195 for detailed information about the “Start At Loop” control.
Tuning Controls
Transpose
This function allows you to transpose the key of the selected voice(s) in semitone
intervals by shifting the keyboard position relative to middle C. The transpose range is
-36 to +36 semi tones. You will normally use the transpose function to tune a voice to
its keyboard location, or simply to transpose the voice.
This is the same Transpose control displayed on the Mix/Tune tab of Voices & Zones
(page 87) and changes made to either page will appear in both places.
Coarse Tuning
This function allows you to change the tuning of the voice in semitone intervals. The
coarse tuning range is -72 to +24 semi tones. Unlike the transpose function, coarse
tuning stretches the pitch of the individual samples assigned to a key and may change
the timbre of a voice.
This is the same Coarse Tuning control displayed on the Mix/Tune tab of Voices &
Zones (page 84) and changes made to either page will appear in both places.
6 - Voice Processing
Oscillator
Use Transpose
when you want the
voice's timbre to
remain constant.
Use Coarse
Tuning when you
want to change the
timbre of the voice.
Use the Coarse
Tuning control to
change the tuning of
voices containing
multiple drums.
E-MU Systems 115