Emulator Composite.book - Creative

Show Grid
Show or hide the vertical black grid lines across the waveform display.
Autoscroll
Autoscroll, when on, keeps the cursor line in the center of the waveform display.
Show Note Markers
Show or hide Note Onset Markers.
S Show Loop Markers
Show or hide Loop Markers.
Z Show Zero Crossing Threshold
Shows or hides the Zero-crossing Threshold markers located near the zero vertical line
on the waveform display. The zero-crossing threshold can be adjusted to accept sample
points which are close to zero. See page 183 for additional information.
Vertical Units
If you right-click in the vertical units area of the waveform
display the popup menu shown at left appears.
Zoom In
Double Click
Increases the Vertical magnification by 2
times with each selection.
Zoom Out Decreases the Vertical magnification by 2
times with each selection.
Horizontal Units
If you right-click in the horizontal units area of the
waveform display the popup menu shown at left appears.
Show Beat Markers Show or hide Beat Markers.
Select Ctrl-Click Right-click on a Beat Marker, Note
Onset, or Loop Marker to select.
Go To Moves the cursor to the selected
region.
Zoom In
Double Click
Zoom Out
Increases the horizontal magnification
by 2 times with each
selection.
Decreases the horizontal
magnification by 2 times with
each selection.
Add Loop Adds a pair of Loop Markers that
you can place wherever you
want.
Add Note Marker Adds a Note Onset Marker at the
current cursor position. See
page 190.
7 - Editing a Sample
Display Menu Items
Tip: You can hold
the Ctrl key while
scrolling the mouse
wheel to scroll right and
left.
E-MU Systems 159