Emulator Composite.book - Creative

7 - Editing a Sample
Display Menu Items
Display Menu Items
These options are available in the Display menu. If you Right-click in the vertical or
horizontal units area of the waveform display a popup menu appears with the same
options.
Zoom In (Page Up)
Magnifies the horizontal scaling to show
more detail in the waveform. You can also use
the Zoom controls in the lower right corner of
the waveform display to increase or decrease
horizontal resolution.
Zoom Out (Page Down)
Reduces the horizontal scaling to show less
detail but more of the entire waveform.
Zoom In (Ctrl +Page Up)
Magnifies the displayed height of the
waveform to show more detail.
Zoom Out (Ctrl +Page Down)
Reduces the displayed height of the
waveform.
Zoom To Selection (F10)
Automatically scales the display so that the
selected area is visible.
Zoom To All (F11)
Automatically scales the display so that the entire waveform is visible.
Zoom To Sample (F12)
Automatically scales the display to the highest magnification.
100 Display Time in Samples
Units are expressed in samples beginning from the start of the sample.
1.0 Display Time in Seconds
Units are expressed in seconds beginning from the start of the sample.
1:1
Display Time in Bar:Beats
Displays Bar and Beat Markers instead of samples or seconds.
Display Level in Percent
Units are expressed in percentages with 100% equal to full code and 0% as the
baseline.
Display Level in Decimal
Units are expressed in decimal form with 1.0 equal to full code and 0 as the baseline.
Display Level in dB
Units are expressed in decibels (headroom) with 0.0 equal to full code and infinite as
the baseline.
Tip: You can also use
the mouse wheel to
zoom in and out.
Tip: You can also
zoom to all by clicking
the button in the
bottom-right corner
between the zoom
sliders.
158 Emulator X2 Operation Manual