Emulator Composite.book - Creative

FX Routing
Make sure that you are thoroughly familiar with the architecture of Emulator X
(page 29), before delving into the effects section and it will make a lot more sense.
Study the effect routing diagrams below and the preceding page. The effects architecture
of Emulator X is very flexible and allows for a variety of different signal routing
schemes.
Block Diagram of the Effects Screens
Preset Effects
A & B On/Off
Aux Effect
View
Main Output
ASIO Select
9 - Effects
Programming Effects
Aux Output
On/Off
Aux Output
ASIO Select
ASIO 1/2
ASIO 1/2
ASIO 3/4
ASIO 5/6
This diagram shows the effects routing using the actual Emulator X screens in the Voice, Preset and Multisetup.
The Main output and the Aux 1 outputs are both routed to EX Main (ASIO 1/2) and will be combined into the ASIO 1/2 channels.
Voice - Main Output Adjusts the amount of Voice signal to the Wet/Dry mix control.
Voice - Aux Outputs 1-3 Adjusts the amount of Voice signal sent to the Aux 1-3 Busses (and Effects)
Voice - Wet/Dry Mix Adjusts the Wet/Dry mix of the Voice main output sent to the Preset effects section.
Preset - Main Output Adjusts the amount of Preset effect signal that will be sent to the Main Output.
Preset - Aux Outputs 1-3 Adjusts the amount of Preset effect signal that will be sent to the Aux 1-3 busses.
Multi - Effects A & B On/Off These buttons enable or disable the Preset A & B effects for each MIDI channel.
Multi - Aux Effect View These buttons let you see the Main output screen or the Aux 1-3 effect screens.
Multi - Main Output ASIO This field allows you to select the ASIO channel pair for the Main Output. ASIO
outputs appear in the list only after they have been created in PatchMix DSP.
Multi - Aux Output On/Off This button turns the Aux outputs on or off for each MIDI channel. In the factory
presets, this button effectively enables or disables the global effects.
Multi - Aux Output ASIO This field allows you to select the ASIO channel pair for Aux Outputs 1-3. ASIO
outputs appear in the list only after they have been created in PatchMix DSP.
E-MU Systems 213