Emulator Composite.book - Creative

Output View Button
This button allows you to view the Aux Send On/Off, Main Output Routing, and Preset
FXA/FXB Bypass buttons when not in Single Mode. (The button is disabled in Single
mode.)
You may want to bypass the Preset Effects on certain channels in order to free up CPU
power or to hear the presets dry.
Aux FX View Buttons
The buttons above the TV display select which of the three possible Aux Effect is
currently displayed. Note: The Output View button is disabled in Single mode.
Aux Send On/Off
These buttons enable (blue) or disable (grey) the inputs to the Aux Sends for each
MIDI channel. When a factory FX template (such as Proteus X Composer) is used, these
buttons serve to enable/disable the Aux FX for each channel. The Main Output is
unaffected by these buttons.
These buttons disable the Aux Sends whether the Aux FX are being used or not. Please
refer to the diagram on page 212 to see the exact location of this switch in the signal
path.
Output View
Button
Preset FX
Enable Buttons
Aux Effect View Buttons
Main Output
Routing
Aux Send
On/Off
Preset FX Enables
These two rows of buttons marked FXA and FXB, enable or disable the preset effects for
each MIDI channel. These work differently than the Aux Send On/Off buttons in that
they bypass the effects instead of turning them on or off. These buttons are useful to
bypass any preset effects which may have been programmed in the preset.
Please refer to Chapter “9 - Effects” on page 209 for detailed information about the
output and effects routing.
Select Effect
Click on the Effect Select icon at the top right corner of the Effects TV screen. A list
of available effects drops down. See “Adding an Aux Effect in the Multisetup” on
page 210 for complete details on how to add aux effects.
TwistaLoop Override
This three-way switch determines if the beat looping features
are locked to Master Tempo. The three modes are as follows:
• On: Beats on the channel are locked to the Global
Master Tempo. This control overrides the “Sync
To Master Clock” setting in the preset.
• Off: Beats on the channel are NOT locked to the Global Master Tempo. This
control overrides the “Sync To Master Clock” setting in the preset.
• Not Set: The “Sync To Master Clock” button in the Preset Globals page determines
whether or not the Beats are locked to the Global Master Tempo.
4 - Multisetup / Preset Globals
The Multisetup
The Output View
button is only available
when any of the
multimode views are
selected. In Single mode
you can only control the
current channel.
E-MU Systems 61