Emulator Composite.book - Creative

Voice Effect Sends
Each voice has one Main Output level control which feeds a Wet/Dry mixer, and three
Aux Send level controls. The Wet/Dry outputs from all voices in the preset are summed
into the Preset FX. The output of the Preset FX section can be mixed into the Main and
Aux 1-3 outputs. The Main Output of the Preset FX goes directly to the channel’s main
stereo output. The Aux Outputs of the Preset FX are summed together with the Aux
Output signals from all the voices.
All the Aux Sends 1-3 from all voices and channels are summed with Aux Outputs 1-3
from the Preset FX and then feed the Aux FX processors located on the Multisetup page.
See page 61. The outputs of the Aux FX processors (which may be bypassed) feed the
Aux Output section, where they can be directed to any available ASIO output.
The Aux Output On/Off button to the right of each channel main output allows you to
turn the Aux Sends on or off for that channel so you can hear the channel with or
without effects.
Voices
Wet/Dry
wet
dry
Main
per
VOICE
Aux 1
Aux 2
Aux 3
per PRESET
FX A
FX B
Post FX
Sends
Main
Aux 1
Aux 2
Aux 3
Aux
On/Off
The Voice Effect Send levels and the Wet/Dry mix can be controlled using the voice
modulation cords. See “Send Aux 1-3” on page 145.
See also “Controlling the Preset Effect Amount from the Voice” on page 217.
6 - Voice Processing
Voice Effect Sends
E-MU Systems 141
FX
FX
FX
Main
Aux 1
Aux 2
Aux 3
per MULTI
ASIO 1/2
Aux Outputs
ASIO 1/2
ASIO 3/4
ASIO 31/32
ASIO 1/2
ASIO 3/4
ASIO 31/32
ASIO 1/2
ASIO 3/4
ASIO 31/32