Emulator Composite.book - Creative

9 - Effects
Aux FX Screen
Aux FX Screen
All effects have a wet/dry mix parameter to control the ratio of effected-to-plain signal,
which is stored with the FX preset. The effect parameters vary with the type of effect.
Generally, when using the Aux Effects, the wet/dry mix in the effect should be set to
100% wet since the Aux Send amount controls how much effect will be applied.
Aux Effects
Wet/Dry Mix
Control
Effect
Parameters
Output
View
Aux1-3
Select
Effects List
Effect
Bypass
Effects List Click on the Effects List icon to show the list of effects.
Aux 1-3 Select Select between Aux 1, Aux 2, or Aux3 FX in the TV view.
Output View Selects the Main Output Window. See Main Output
Window. (Note: This button is disabled in “Single” mode.)
Wet/Dry Mix Control Adjusts the ratio of effected signal to un-effected signal.
Effect Bypass When this button is selected (Red), the effect is completely
bypassed, allowing you to hear only the unaffected signal.
Effect Parameters Each effect has its own set of user adjustable controls.
Aux FX Send Amounts
The Aux Send Amounts can be controlled either from the Preset Cords or from within
each Voice. Please refer to the FX Routing Diagram on page 212. Aux Effect parameters,
such as Delay Time, Feedback, etc., can not be externally controlled.
218 Emulator X2 Operation Manual