Emulator Composite.book - Creative

7 - Editing a Sample
Sample Edit Tools
Reverse
Reverse flips the selected portion of the sample so it plays backwards.
To Reverse a Sample
1. Click once on a sample icon in the Tree to select it for editing. The waveform
display appears.
2. Magnify the waveform using the Zoom button below the display.
3. Select the area of the waveform you want to reverse.
4. If the sample is stereo you will be given the option to reverse the right side only, left
side only or both.
5. Press the Reverse button. The selected section of the sample will be reversed.
6. Use the Undo function (Ctrl+Z) in the Edit menu if you are not happy with the
results.
Swap L-R Channels
Swaps sides of a stereo sample or moves a mono sample to the other side.
To Swap the Left and Right Channels
1. Click once on a sample icon in the Tree to select it for editing. The waveform
display appears.
2. Usually, you will select the entire sample. In this case you don’t have to select a
specific area.
Selecting a specific region of the sample to Swap can create a sudden thump or pop
at the selection point from a sudden gain increase or decrease.
3. Press the Swap L-R button. The left and right channels will be swapped.
4. Use the Undo function (Ctrl+Z) in the Edit menu if you are not happy with the
results.
Press the Play button
to hear the sample as you
adjust the selection area.
172 Emulator X2 Operation Manual