Emulator Composite.book - Creative

4 - Multisetup / Preset Globals
The Multisetup
There are five views of the Multisetup page. The Multisetup View buttons
change the current view. The Single channel view is shown below.
• Single ..................... Displays the preset for the currently selected MIDI channel.
• Channels 1-16 ...... Displays the preset, volume and pan for MIDI channels 1-16.
• Channels 17-32 .... Displays the preset, volume and pan for MIDI channels 17-32.
• Channels 33-48 .... Displays the preset, volume and pan for MIDI channels 33-48.
• Channels 49-64 .... Displays the preset, volume and pan for MIDI channels 49-64.
Changing Presets (from Single View)
Single View is the default view when you first run Emulator X. This view is convenient
for performing live or when you’re only playing one preset at a time. All the main
parameters for the selected MIDI channel are displayed in Single View and a convenient
Category mode allows you to quickly select presets in a certain category. A closeup
of the current channel settings is shown below.
Single View Close-up
Preset
Inc/Dec
Select/View
Preset
Number
Preset
Name
Channel
Volume
Select All or Select
by Category
Main Output
Select
Select
Category
FXA/FXB
Enables
Select/View
MIDI Channel
Aux Output
Enable
MIDI Channel
Inc/Dec
Bank/
Program
Display
Selected
Category
Channel
Pan
To Select Presets by Number
1. Click on the Preset Increment/Decrement buttons to move up or down the presets
by number.
2. Highlight the Preset Number field and type in the desired preset number.
Note that Single
View only changes the
display and does not
affect the currently
selected MIDI mode (i.e.
Omni, Poly or Multi).
The Bank/Program
Display shows the Bank
and Program number
you would use to select
the preset from a
sequencer.
Tip: You can also
select a preset by
dragging and dropping it
from the tree into the
single view screen.
58 Emulator X2 Operation Manual