Emulator Composite.book - Creative

11 - From Sample to Preset
SynthSwipe
7. Click OK to perform the Sampler Options and Build the Preset (if enabled). If you
chose not to build a preset, the samples will be added to the end of the sample list.
If you did build a new preset, a new preset (with your chosen name) will also be
added to the end of the preset list in the bank.
8. Open your new preset in the Voice Processing window and modify as desired to
complete the preset.
9. Remember to SAVE THE BANK or all your work will be lost.
SynthSwipe
Got an analog instrument with MIDI capabilities, such as a drum machine or a sampler
keyboard? You can sample the entire instrument automatically using SynthSwipe.
All you need to do is: Connect your instrument’s analog outputs to your computer,
connect your computer’s MIDI out to your instrument’s MIDI in, and run SynthSwipe.
Use the following steps to learn how.
To Set Up Your Connections
1. Connect the analog line out(s) to your sound card’s analog line in(s). Use stereo if
possible.
2. Connect the MIDI output on your sound card to the MIDI input on your
instrument. See the following diagram:
R SUB 1 L R MAIN L
OUTPUTS
In
Out
Main Outs to Sound Card In
1L 1R 2L 2R
1L 1R
MIDI In
2L 2R
MIDI Device
(MIDI Sampler or Synthesizer)
0 .
RETURN
PRESE T S ELE C T
EXIT
ENTER
PA G E
LEVE L
MIDI
R SUB 1 L R MAIN L
OUTPUTS
IN OUT THRU
1 2 3 4 5 6 7 8 9
EMULATOR
Rear Panel
IN OUT THRU
Sound Card
2L
Phono
2R
3L 3R
S A M PLE
PRESE T
S E QU ENCER
Gnd
ASSI G N A B L E K EYS
R EA L T IME CO NTRO LLE RS
Out
1 2
MIDI Cable
268 Emulator X2 Operation Manual
3
MIDI
Out
In
MIDI 1
48VDC
+ -
EDI