Emulator Composite.book - Creative

10. Click on each of the Region names one at a time. In the example above, Region 8 is
not gating a sample and needs to be deleted. With the Region name selected, click
the Delete button to discard the gate. Poof!
11. In the example above, the End points can simply be dragged inward toward the
Start point to remove the silence at the end of the sample. Press the Play button (or
hit the Space bar) to listen to the gated area.
Labeling the Regions
12. Press the Set Keys… button in the Edit Section. The Emulator X analyzes each
sample and labels it with the correct pitch. These key numbers can be used later for
placing the sample on the keyboard.
13. If you know the pitch of the region, you can manually name the regions by clicking
over the field and typing in the key number.
14. Click on the Name field in the Region List section. The selected section of the
waveform is highlighted as you click on the name.
15. The Set Names… button allows you to name any selected samples. Shift-click or
Ctrl-click to select multiple samples for naming. Use the Select All button to
choose all regions. You can also include the original key in the sample name to
make placement or identification easier.
11 - From Sample to Preset
Acquire (Sampling)
E-MU Systems 265