Emulator Composite.book - Creative

5 - Voices & Sample Zones
Realtime Window Page
Assign the Realtime Controller
4. Select the first voice by clicking anywhere on the strip. A red box forms around the
voice to show that it’s selected.
5. Hold the Ctrl key and select the next voice by clicking on it. Both voices should be
surrounded by red boxes.
6. With both voices selected, select Open Voices (Crtl+Enter) from the Preset menu.
The Voice Processing window appears. Verify that the two voices are selected in the
“Voice Selector” section of the window.
7. Assign Crossfade Random as modulation source in the Cords section. Select Amp
Crossfade as the destination. Set the Cord Amount to +127.
8. Voices 1 and 2 will now be randomly selected whenever you press a key.
Using Values to Define Realtime Window Parameters
As you use the graphical interface to change the Realtime Window parameters, you’ll
notice that the values in the Overview section at the bottom of the screen change as
well.
You can adjust the Realtime Window information here as well. Choices include High
and Low notes, and High and Low fades.
Tip: Random Cross-
Switch can be used in
combination with
Velocity Switching to play
random voices when you
play softly and a known
voice when you play
hard.
94 Emulator X2 Operation Manual