Emulator Composite.book - Creative

Main Output Window
The Main Output window is accessed by clicking the Outs button. (This option is not
available in “Single” mode.) This one window allows you to set the ASIO routing of the
Main Output, enable the Preset Effects, and enable the Aux Outputs for each MIDI
channel. This window is extremely handy for turning all your effects on or off.
The Preset Effect On/Off buttons are used to temporarily disable the selected A or B
effect while passing the signal. These controls allow you to hear each preset with or
without effects or to turn off all Preset Effects in order to gauge the CPU load incurred
by the Preset Effects.
The Aux Output On/Off buttons work differently than the Preset Effect On/Off
buttons and completely turn off the three Aux Sends for the selected channel. When
using the factory presets, the Aux Output buttons are used to enable or disable the Aux
Effects (because all outputs are connected to EX Main). If you were using the Aux
busses to send signals to physical outputs, the Aux button could be used to turn these
outputs on or off.
Main Output
Window
Preset
Effects
On/Off
Output
View
Aux 1-3
Select
Main Output
Routing
Aux
Output
On/Off
Output View Selects the Main Output Window.
(Note: This button is disabled in “Single” mode.)
Aux 1-3 Select Select between Aux 1, Aux 2, or Aux 3 FX in the TV view.
Preset Effects On/Off Turns the Preset A or B effects On or Off for each MIDI
channel and passes the signal through.
Main Output Routing Selects the ASIO channel for the Main Output. See tip -->
Aux Output On/Off Turns the Aux Outputs On or Off for the selected channel.
This turns all three Aux Outputs Off, rather than bypassing
the effects. (This button functions as an FX Bypass when the
standard Proteus X Composer template is used.)
9 - Effects
Main Output Window
ASIO channels must be
created in PatchMix or
another Host application
before they appear in this
list.
E-MU Systems 215