ClearPath OS 2200 Series Release 13.2 Software Planning and ...

7.4. Description of Fast-Load Tapes
Description of Fast-Load Tapes
To support faster installation of the ClearPath Integrated Operating Environment (IOE)
products, Unisys has created the following fast-load tapes:
• The CP-FLD and CP-FLD400 (“first-load”) tapes contain products that must be
installed on your current system before migrating to the new Exec. The products on
this tape are nonkeyed, nonbuildable, and are installed in their default mode.
• The following fast-load tapes are keyed. You must install keys first before products
can be installed from these tapes:
− The CP-OE1A tape is included to ease installation of new levels of the security
management products, which are required to administer security following a
migration installation. Products on the tape are DAP, DMPLIB, Open DTP,
Security-Admin, and SIMAN.
− The CP-OE1B tape contains IOE products that typically can be installed in default
mode without change at a site.
• The CP-OE2 tape contains products (TIPUTIL, MCB, and DPS 2200) that might or
might not need to be configured to your particular needs. If you do not need to
reconfigure them, use the INSTALLPKG runstream to install those products in
default mode. The products on this tape are nonkeyed, nonbuildable, and are
installed in their default mode.
Note: See Appendix C for detailed information about tape packaging of products.
7.5. Migration Sequences
This subsection describes two migration sequences you can choose from to install your
ClearPath OS 2200 Release 13.2 products. Because of the many product and feature
interdependencies, do not randomly install ClearPath OS 2200 Release 13.2 software.
Although some flexibility is allowed, the recommended migration order presented in
these sequences should be observed as closely as possible.
The migration sequences are as follows:
• Installing products from fast-load tapes (7.6)
• Installing products from package tapes (7.7)
Notes:
• If you are migrating an existing Dorado 400, Dorado 4000, or Dorado 4100 system to
this release from a prior release, there are critical interdependencies involving
CPCommOS, various plateau components, and the installation order for certain
products (including the EXEC). Refer to sections “7.9 Migration for Dorado 4000”
and “7.10 Migration for Dorado 400” for details.
7831 0349–043 7–5