ClearPath OS 2200 Series Release 13.2 Software Planning and ...

Installing from Fast-Load Tapes
Table 7–1. Migration Requirements for Fast-Load Tapes
Required Action Release 12.0
(Exec 48R4)
KEYTABLE$ Migration
code PLE 18756811
Cross-boot consideration
for Dorado 400 and Dorado
4000 systems
Migrating to Release 13.2 (EXEC 48R8A) From…
Release 12.0 Plus
(Exec 48R5)
Release 12.1
(Exec 48R6)
Release 13.0
(Exec 48R7)
√ √ √ No action
required
√ No action required No action
required
No action
required
2. Perform a LIBSAVE of your current system. See 5.43 (SOLAR considerations) for
more information.
3. Beginning with ClearPath OS 2200 Release 12.1 a new fast-load tape is provided for
the Dorado 400 systems. Dorado 400 sites must use the CP-FLD400 fast-load tape.
All other systems continue to use the CP-FLD fast-load tape.
Install the products contained on the first-load (CP-FLD or CP-FLD400) fast-load tape
(refer to the following table).
If you are a non-Dorado 400 site, install these products quickly by using the ST
INSTALLFLD command.
If you have a Dorado 400 system, you must use the ST INSTALLPKG runstream to
install the CP-FLD400 fast-load tape. Additional input is required with this runstream
for installing the CP-FLD400 tape. You will be prompted to provide the Logical
Package name, CP-FLD400 and the Package Level, 13.2.
The SOLAR full-screen interface can also be used to register and install these
products.
Note: If you use the full-screen interface for installing CP-FLD, CP-FLD400, or CP01
products, sign off from your demand terminal and wait until the batch install
runstream finishes. Then, reenter the full-screen interface and continue with your
installation.
7–8 7831 0349–043
Release 13.1
(Exec 48R8)
No action
required
No action
required