18.08.2013 Views

ClearPath OS 2200 Series Release 13.2 Software Planning and ...

ClearPath OS 2200 Series Release 13.2 Software Planning and ...

ClearPath OS 2200 Series Release 13.2 Software Planning and ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Tape Mnemonics<br />

Table 4–1 describes the assign mnemonics.<br />

Tape <strong>and</strong> DVD<br />

Note: The U47, U47L, U47NL, U47M, U47LM, LCART, NLCART assign mnemonics<br />

have not changed with this release. All assign mnemonics are described in the Executive<br />

Control Language (ECL) <strong>and</strong> FURPUR Reference Manual.<br />

Assign Mnemonic<br />

Table 4–1. Tape Assign Mnemonics<br />

CONV EQUATE<br />

Drive Allocated<br />

T All tapes Any available drives on system,<br />

regardless of format<br />

HIC All 18-track or 36-track<br />

1/2-inch cartridge tapes<br />

HICL All 18-track 1/2-inch<br />

cartridge tapes<br />

HICM All 36-track 1/2-inch<br />

cartridge tapes<br />

DLT70 All DLT 7000 cartridge<br />

tapes<br />

Any available 18-track or 36-track drive<br />

(for example 5073, CTS5236)<br />

Any available 18-track drive (for<br />

example, 5073)<br />

Any available 36-track drive (for<br />

example, CTS5136, CTS5236,<br />

<strong>OS</strong>T4890)<br />

Any available DLT 7000 tape drive<br />

HIS98 All HIS98 cartridge tapes Any available HIS98 tape drive<br />

HIS98C All HIS98C cartridge tapes Any available HIS98C tape drive<br />

HIS98D All HIS98D cartridge tapes Any available HIS98D tape drive<br />

HIS99B All HIS99B cartridge tapes Any available HIS99B tape drive<br />

T10KA All T10000A cartridge tapes<br />

UT10KA<br />

LTO<br />

LTO3<br />

LTO4<br />

ULTO3, ULTO4<br />

ULTO3<br />

ULTO4<br />

Any available T10000A cartridge tapes<br />

Any LTO tape drive<br />

VTH All virtual tapes Appropriate tape drives<br />

Notes:<br />

• Be aware that when you use general assign mnemonics (T <strong>and</strong> HIC), you should<br />

determine the exact device type that was allocated so that later reassignments<br />

use the required assign mnemonic to read the tape. For example, if you begin<br />

with “HIC” <strong>and</strong> are allocated a 36-track device, you must use HICM, HIC51,<br />

HIC52, or U47M to reassign a 36-track device in order to read the tape.<br />

• Using the pool name “NONCTL” with the mnemonic U47 will force the<br />

assignment to a freest<strong>and</strong>ing U47 drive.<br />

7831 0349–043 4–11

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!