ClearPath OS 2200 Series Release 13.2 Software Planning and ...

Initializing an Existing System (I-Boot)
Installation and
Support Name
19. Install the products for which you are authorized from the following set.
Note: If you are authorized for TeamQuest Baseline, do not use the INSTALLPKG
runstream to install CP18. TeamQuest Baseline and TeamQuest Online are mutually
exclusive.
Level
Logical
Tape
Name
Default
Installation
Mode
Notes
SIMAN 6R6 CP18 SEC If you already installed the CP-OE1A tape, you do not
need to reinstall SIMAN .
MSAR 7R7B CP18 A
CULL 5R1A CP18 A
IACULL 5R1A CP18 A
SAUTILITIES 6R6 CP18 A If you currently have SLRR or TUTIL installed and you
want to install SAUTILITIES, you must remove SLRR
and TUTIL using the PRODRV utility. For more TUTIL
information, see 5.47.
MSMANAGER 5R7F CP18 A
LA 7R6A CP18 A
OSAM 7R5 CP18 A
PAR 9R2 CP18 A
TQ-BASELINE 7R4F CP18 A TQ-ONLINE and TQ-BASELINE are mutually exclusive.
TQ-ONLINE 7R4F CP18 A TQ-ONLINE and TQ-BASELINE are mutually exclusive.
TQD-FRAGGER 4R1D CP18 A
TQRDFRAGGER 4R1D CP18 A
TIP-LA 1R4E CP18 A
20. You can now tailor the ClearPath OS 2200 Release 13.2 initial system platform for
the following:
• Other software installation (including nonkeyed media/products). Refer to the
Software Products Installation Guide.
• The SOLAR PKGREG Key Package Summary Report produced when the key
tape was registered to determine which products remain.
• OS 2200 Exec. Refer to the Exec System Software Installation and Configuration
Guide.
• Transaction Processing (TIP). Refer to the Transaction Processing Administration
and Operations Reference Manual.
• Message Control Bank (MCB). Refer to the MCB Installation Guide.
7–34 7831 0349–043