ClearPath OS 2200 Series Release 13.2 Software Planning and ...

Installing from Fast-Load Tapes
Installation
and Support
Name
20. Install the following set of products.
Level
Logical
Tape
Name
Default
Installation
Mode
Notes
UDSC 17R2 CP13 AP3 You must have APP 3 up and IRU short recovered.
For important additional considerations regarding the
Universal Data System suite of products, refer to the
Universal Data System Planning and Installation
Overview and the Universal Data System
Configuration Guide.
RDMSKEY 17R2 CP15 A If you already installed the CP-OE1B tape, you do not
need to reinstall RDMSKEY.
RDMS 17R2 CP15 A
DMSKEY 21R2 CP14 A
DMS 21R2 CP14 NOREGISTER
DMS-RA 4.0 CP14 A
UREPKEY 13R2 CP16 A
UREP 13R2 CP16 A The installation user-id must be the same as the UREP
security officer.
RDMS-JDBC 2.7 CP15 A
QLP 7R3B CP16 AFCB-DMS-P
SFS 4R1 CP16 COLLECTOR
Installation
and Support
Name
Application group 3 must be up and recovered before
you install UREP.
21. Install the products for which you are authorized from the following set.
Note: If you are authorized for TeamQuest Baseline, do not use the INSTALLPKG
runstream to install CP18. TeamQuest Baseline and TeamQuest Online are mutually
exclusive.
Level
Logical
Tape
Name
Default
Installation
Mode
MSAR 7R7B CP18 A
CULL 5R1A CP18 A
IACULL 5R1A CP18 A
Notes
SAUTILITIES 6R6 CP18 A If you currently have SLRR or TUTIL installed and you
want to install SAUTILITIES, you must remove SLRR
and TUTIL using the PRODRV utility. For more TUTIL
information, refer to“Tape Labeling Utility for ClearPath
OS 2200 (TUTIL)” in Section 5.
MSMANAGER 5R7F CP18 A
7–14 7831 0349–043